Through
08CD RFID reader to connect computer and copy IC card into N2M
1¡¢Click
the "power" button to boot
2¡¢When
you see this screen, use the USB cable to connect computer.
3¡¢After
Connected , open this new USB removable disk, and double-click to open the
decoding process.
4¡¢And
then click the ¡°OK¡± button of 08CD reader to enter the "Type A - IC"
interface
5¡¢Put
the target IC card on the display screen
5¡¢Click
"Start Decoding" button, waiting for the end of the decoding
6¡¢If
the prompt is "Decoding success", please put the N2M on the top left
side of the screen area
7¡¢Click
the "write" button, try to write the information to N2M, if the
prompt of screen is "write success" , it indicates the target card
has been successfully copied to the N2M.
If
the write fails, please adjust the position of the N2M to try to write again,
usually the sensitive area of the 08CD reader is the upper left side of the
screen, such as the red circle area above the picture.
