Instruction for Use
Click the above image to watch
the instructions video
Function Introduction
JAKCOM F9 is a portable anion air purifier, which can purify ambient air and detect ambient temperature and humidity.
Packing list
Structure description
A. Anion emitting head
B. Display screen
C. Indicator light
D. Temperature and humidity sensors
E. Buttons
F Charging port
Charging
Plug the charging coil in the package into the charging port of the host, then connect it to the USB power of 5V2A,
Charging starts when the indicator light is always on and red; charging completes when the indicator light is always on and blue. It usually takes about 2 h to fully charge the battery.
First use
Please fully charge the battery before first use .
Power on
Long press the right button, release the button when the display screen shows "88.8", the start-up is completed when the indicator light flashes blue .
Anion air purification
The anion air purification function will automatically start after power-on.
The anion emitting heads on both sides of the top may irregularly squeak at low decibel at work.
View ambient temperature and humidity
Short press the right button after power-on
When "°C" is displayed on right side of the display screen, the figure on the screen is the ambient temperature in centigrade.
Short press the right button again
When "°F" is displayed on right side of the display screen, the figure on the screen is the ambient temperature in Fahrenheit.
Short press the right button again
When"" is displayed on right side of the display screen, the figure
on the screen is the ambient humidity.
Low battery
The battery power is low when the indicator light flashes red, please charge as soon as possible.
Power off
Long press the right button, release the button when the display screen shows "OFF", the shut-down completes when the indicator light flashes red and blue alternately three times.
Specification parameters
Stand-by time: 36 hours
Anion concentration: 10 million cm3
Working voltage: 5V
Operating power: 24mW
Battery capacity: 240mAh
Display screen: LED
Charging port: Type-C
Charging time: 2 hours
Host material: PC+ABS
Product weight: 26g
Product size: 66*28*18mm
Notes
1. Do not touch the Anion Emitting Head on both sides to avoid damaging it or causing tingling;
2. This product is not waterproof. If you are caught in the rain or soaked in water, please turn it off as soon as possible and blow it dry.
Contact details
a) Website: http://www.JAKCOM.com
b) Email: service@JAKCOM.com
c) Service Phone: +86 400 806 7311, +86
0351-4383818
d) Service time: 9 am – 9 pm GMT+8
e) Online Service: https://www.facebook.com/JakcomLtd
f) Online Store: https://shop.JAKCOM.com