Function description and test method of N2L

N2L is the second generation of induction type LED colorful nail tip, which will shine when meeting all the high frequency signals, such as bus, subway, access control, attendance, parking, elevator, shopping, mobile phone NFC, etc.

N2L Test Demo

Before install N2l to your nail, please test it first, there are following 3 ways to test N2L:

1.   Using mobile phones for test, first switch on the mobile phone’s NFC function;

Then put the N2L chip on the mobile phone’s NFC signal area (different mobile phones may has different NFC signal area), and the chip works normally if the chip is lighted.

2. Using JAKCOM ACR122u IC card reader to test N2L ( Need to connect computer )

【Click here to view ACR122u】

3.  Using JAKCOM 08CD IC card reader to test N2L ( Don’t need to connect computer ) 

【Click here to view 08CD】

N2L installation demo

1.   First, please select appropriate finger for installation, N2L chip material is very soft, which is suitable for all fingers.

2.  Then, select a piece of nail tip suitable for the nail size.

3.  Determine the location where the nail tip fits the chip, and apply appropriate amount of glue, or smear the nail tip glue evenly on the chip’s obverse side(surface with a protrusion).

4.  Then, paste the chip on the corresponding position of nail tip, please notice that nail tip should be glued with chip’s obverse side(surface with a protrusion).

5.  Then, take another piece of nail tip with similar size, place it on the chip and squeeze the chip’s periphery, but do not squeeze chip’s protruding parts, in case of damaging internal components. Blow air into the gap while squeezing to let the glue dry as soon as possible. Generally, it will take about 30 seconds. Then, remove the nail tip used for squeezing.

6.  Apply glue evenly to the contact surface between nail tip and nail.

7.  When the glue becomes ropy, place the nail tip on the surface of the nail, and keep pressing for a period of time.

8.  After the nail tip and nail are firmly glued, users can trim their nail tips and apply nail polish or do other operations according to users’ different needs.

Frequently Asked Questions

1. No reaction

a. Please try another N2 chip to determine whether problem belong to the N2 chip or Reader.

b. If the test is normal before installation, but after the installation to the nail on finger, become no response, this situation can not be repaired, should replace it, so every time install chip, please do not exert excessive force to squeeze or bend the chip.

2. The N2L LED has low brightness

a. Please attention color depth and transparency of nail polish, different color depth or transparency different brightness.

b. Different mobile phone or reader has different electromagnetic signal strength, different signal strength has different brightness of N2L, and the distance more closer, the N2L more brighter.